Skip to main content

Filter By:

  • Show More Brands

  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Pedals

Garmin Vector 3 Dual-Sensing Power Meter
$999.99
Dual-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3 pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3 has the sensors housed right in the pedals, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Measures total power, left/right balance, cadence and cycling dynamics - Sleek design provides greater cornering clearance and improved stack height - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x4) - Battery life: up to 120 hours - Weight: 316 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/55 mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Garmin Vector 3S Single-Sensing Power Meter
$599.99
Single-sensing Pedal-based Power Meter Ride stronger, smarter, connected with the Vector 3S pedal-based power meter. As you strive to beat your personal best on your next race or Gran Fondo, power is the most reliable way to gauge your performance on any given day, at any given time. Unlike other power meters, Vector 3S has a sensor housed in the left pedal, so it delivers reliable, accurate data on every training session. - Installs like any other pedal and quickly transfers between bikes - Reports cadence and total power (watts) - Easily upgrades to dual-sensing system - Fully integrates with Garmin cycling ecosystem for data analysis - Allows for easy updates via compatible Edge cycling computers, ANT+ connectivity or Bluetooth-enabled fitness devices and Garmin Connect Mobile app - Battery life: up to 120 hours - Cleat hardware included WARNING: The maximum weight limit of the cyclist using the Vector system is 231 lbs (105 kg). Cyclists over this weight limit risk personal injury and property damage. Specifications: - Battery type: LR44/SR44 (x2) - Battery life: up to 120 hours - Weight: 324 g - Max. rider weight: 105 kg - Accuracy: +/- 1.0% - Cleat type: Keo - Q-factor: 53 mm/ 55mm with supplied spacing washer - Stack height: 12.2 mm - Field calibration - Adjustable release tension - Garmin Connect - Measurement location: Spindle - Communication: ANT+ and Bluetooth
Time Xpro 15
$500.00
The XPro 15 is the ultimate expression in pedal technology. Created for competitive cyclists and triathletes seeking a competitive edge, the XPro 15 features CeramicSpeed watt-saving bearings, a hollow titanium axle and a super light carbon body giving you a pedal that weighs 88 grams per pedal. ICLIC, with its pre-opened engagement system, makes it super easy to clip in. The low stack height and oversized pedal platform make pedaling more efficient and comfortable.
Garmin Vector 3S Upgrade Pedal
$499.99
Upgrade your Vector 3S to a dual-sensing power meter, and step beyond watts to see exactly how your pedaling style generates the force that moves you. When paired with Vector 3S, the upgrade pedal completes the Vector power meter system, providing left/right balance data and cycling dynamics. With the new podless design, it installs like any other bike pedal. Revolutionary cycling dynamics show you exactly where you’re generating power throughout the pedal stroke. See where you apply force on the pedal to ensure proper cleat position. The upgrade pedal also tracks when and how long you were seated versus standing so you can gauge position effectiveness.
Crank Brothers Candy 11 Pedals
$450.00
Crank Brothers' Candy 11 is the pedal to sate a racer's sweet tooth. This customizable pedal boasts integrated traction pad technology to refine fit, feel and power transfer, while titanium components shave weight. A ribbed body helps your foot grab the pedal body when you've unclipped, though the four-sided entry will have you engaged and off on the first try. Rely on chamfered edges to reduce rock-strikes, and a hex alloy end cap bash guard to help minimize damage to the pedal body.
Crank Brothers Eggbeater 11
$405.00
Crank Brothers' Eggbeater pedals are 4-sided, making them super easy to enter and exit. Their open design makes them shed mud and debris quickly, and they feature 6-degrees of knee-friendly float. The Eggbeater 11s boast titanium axles, wings, and bodies, stainless-steel springs, and inner needle bearings. Crank Brothers has also made the Eggbeater internals water-tight for excellent durability and consistently smooth pedaling.
Crank Brothers Mallet DH 11
$350.00
Crank Brothers' Mallet DH 11, the premium edition of the world's most successful downhill pedal is best described by its impressive specs. - Titanium wings to reduce weight - Dual chamfered edges to reduce rock-strikes - Exclusive double-anodized black and gold colorway - Concave platform for secure foothold - 8 adjustable pins per side for grip - Integrated traction pad technology to optimize the shoe/pedal interface - Ribbed body for better traction when unclipped - 57mm q-factor for stability at speed - 4-sided entry / superior mud shedding - Customizable float & release angle - Premium bearings & double seal system - 445g/pair
Time ATAC XC 12
$300.00
The ATAC XC 12 is the pedal of choice for Time's elite cyclocross and mountain bike riders. At 124 grams it's their lightest off-road pedal featuring a titanium axle and carbon body. Like the XC 6 and XC 8, it offers a tension adjustment and as with all ATAC pedals, XC 12 offers easy and consistent engagement and an open design that clears debris each time you step in.
Look X-Track Rage +
$270.00
- Body material made of forged aluminum - Spindle Material: Chromoly - Adjustable pins for better grip - Weight: 453 grams per pair - Big surface area - SPD Compatible - Color: Black - Pedals Thread 9/16-inch
HT Pedals T1T Pedals
$235.00
HT's T1T Pedals boast a titanium spindle for light weight. The 16.8mm low profile and 68x83.5mm base platform allow for increased stability on aggressive terrains. T1 features HT's unique proprietary clipless system with its adjustable dual tension settings for secure foot-holding under any condition. - Titanium spindle - Platform: 68 x 83.5 x 16.8mm - Extruded CNC-optimized aluminum for strength to weight ratio - EVO bearings system (needle bearings) and 1 DU bushing per side - 2 adjustable pins per side for additional traction - HT exclusive X1 or X1F cleats - 4 deg (X1), 8 deg (X1F) float and 13 deg release angle
Xpedo Baldwin Ti Pedals
$189.00
The Baldwin offers the best of both worlds bridging the gap between the demands of XC racer to the enduro rider. It features the tried and true Posi-Lock retention system protected by a robust 6061 CNC body providing extra support. - Weight: 292g Ti - Body: 60661 CNC AL - Spindle: Titanium - Bearings: 3 Cartridge - Springs: SWP - Cleat: XPEDO XPT (6° Float) *Titanium spindles have 180lbs weight limit.
HT Pedals T1-SX BMX-SX Pedals
$175.00
The T1-SX BMX pedal offers excellent spring tension and feel. Unclipping under maximum load is a thing of the past with the T1-SX's hook plate techology. EVO+ bearing system featuring IGUS bushings keeps these pedals running smoothly. - 68 x 84 x 17mm - 9/16"
Crank Brothers Mallet E Pedals
$169.00
For enduro riding and racing, it's all about the Crank Brothers Mallet E pedals. Winner of a Design & Innovation Award for 2016, this pedal features a concave platform for a secure, grippy foothold, and six adjustable pins per side for even more security. The adjustable traction pad interface keeps you in contact with the pedal so you can focus on your line. Four-sided entry ensures your foot will catch quickly and easily, as well as helping the Mallet E shed mud like no other. A 52mm q-factor is your best friend on tight trails, because who wants to be clotheslined by a tree? Not you, that's for sure. Throw in chamfered edges to ward off rock strikes, and a customizable float and release system and you're ready to shred. Specifications: - spindle material: forged scm 435 chromoly steel - body material: 6061-T6 aluminum - wing material: 17-4PH stainless - spring material: 300 series stainless steel - release angle: 15° / 20° - q-factor: 52mm - inner bearing type: igus LL-glide bearing - outer bearing type: enduro cartridge bearing - adjustable pins: 6 per side for grip - endcap: hex alloy - cleat: premium brass cleats with shims included - weight: 419g per pair
HT Pedals X2 DH Race Pedals
$169.00
To create its new X2 DH clipless pedals, HT Components started with the effective design of its X1 downhill pedals. The X1's platform was altered to make the X2's easier to get in and out of with a wider variety of shoes. The X2 uses a thinner, 14mm platform than the X1's to allow them to be more responsive, and it uses a slimmer cage design on the CNC-machined body. - Platform:85 X 94 X 14mm - EVO+ bearings with single DU bushing per side - 5 replaceable pins - High spring tension - 9/16"
45NRTH Helva
$165.00
Riding in deep, sticky snow just got a whole lot easier. 45NRTH's Helva pedals feature an open CNC-forged body that excels at shedding snow. Its super thin 9mm profile gives you maximum clearance while cornering and riding in deep ruts, plus they're light. Sealed DU bearings keep them spinning smooth and replacement pin kits are available (sold separately) in seven different colors so you can color-coordinate your rig. - Size: 110mm wide x 100mm long x 9mm high - Spindle diameter: 9/16-inch - Weight: 308 grams
Speedplay SYZR Chrome-Moly
$165.00
Syzr Pedal Systems transfer power more efficiently to your off-road rig. Rider power is delivered to Syzr pedals directly through the cleats, not through the spongy rubber lugs of the shoe sole. Direct, Through-the-Cleat Power Transfer ensures that no rider energy is lost during transmission. SYZR pedals also use Active Cleat Stabilization Technology to improve the precision of the pedal/cleat connection and eliminate the slop and lateral instability common to off-road pedals. With advanced Roller-Cam Release Technology, Speedplay ensures consistent release in wet or muddy conditions. Instead of the usual metal-to-metal connection that allows other pedals and cleats to seize during release, Syzr cleats feature Ceramic Roller-Cams that do not seize when wet because they roll. In addition to improving consistency of release, the ceramic contacts provide exceptional, long-term durability.
Speedplay Zero Chromoly w/Walkable Cleats
$139.99 - $154.00
Speedplay's Zero Chromolys are fantastic pedals for road cycling thanks to their low weight, cornering clearance, adjustability and easy dual-sided entry and exit. This means you'll be the first going out of stop signs and start lines and be able to dive into the deepest corners. The Zeros let you choose a fixed cleat position or up to 15-degrees of unimpeded float, or independently adjust the lateral and fore/aft positioning. They boast needle and cartridge bearings and a cleat-based engagement mechanism that ensures you won’t clip out when going hard. - Dual sized, self-locating entry is easy and precise, every time - Large, stable pedaling platform - Fits any shoe with a 3 or 4-hole mount
Crank Brothers Stamp 7 USA Edition
$150.00
Ride with Pride! Represent your country with Crankbrother's USA-themed Stamp 7 pedal. - Optimal surface area - Minimal profile – thin 11mm-13mm - Concave platform for secure foothold - 10 adjustable pins per side for grip - Premium bearings & seal system - Stamp large recommended for shoe sizes: 10-15 (us) // 43-49 (eu) - Stamp small recommended for shoe sizes: 5-10 (us) // 37-43 (eu)
Crank Brothers Titanium Spindle Kit
$150.00
The ultimate weight-saving upgrade.  - The kit includes: 1 pair titanium spindles + refresh kit (Enduro cartridge bearings, Igus ll-glide bearings, DSS double seal system: internal and external seals, hex alloy end caps, o-rings, nuts, sleeve bushings, & bearing removal tool). - Compatible with: Eggbeater, Candy, Mallet, 5050, Double Shot, model years 2010-present - Weight: 60g per pair - Spindle material: 6al/4v titanium - Max. rider weight: 200lb/90kg - Q-factor: 52 mm
SDG Jr. Pro Kit
$149.99
The industry’s first all-in-one premium youth components upgrade kit, which is ergonomically optimized to enhance performance and ultimate control. - Includes Slater 90 pedals, Slater 650 bar, Slater Jr. grips, and a Fly Jr. saddle - Includes light plastic 22.2 to 19mm shims, located inside the packaging with the instruction manual - Age: Youth - Rail Material: Steel - Clamp Style: Standard Rails - Material: Synthetic - Length: 235mm - Width: 122mm - Weight: 270g
Shimano PD-R7000 105 Pedal
$149.99
PD-R7000 NEW FEATURE - Carbon fiber reinforced resin pedal body - Wide contact area - 265g/pr (25g/pr lighter than PD-5800) BENEFIT - Optimum power transfer - Lightweight - Aerodynamic image - Color: CFRP - Average weight: 265 g - Road clearance: 31° - Binding: Single Sided - Cleat included: SM-SH11 - Optional cleat: SM-SH10 / SM-SH12 - Pedal Type: Road - Reflector: SM-PD65
DMR Vault Pedals
$139.95
This set of pedals aims to provide a large platform, thin profile, durability, tune-ability and serviceability. Ideal for anything from all-mountain, to downhill, to snow. - 105x115mm pedal body - 17mm concave foot bed - Extruded 6061 aluminum body and 4140 chromoly steel axles - High-load DU bushing and cartridge bearing - 11 pins per side and 7 of which can be flipped to fit short- or long-way to fine tune the amount of grip desired - 9/16"
Look X-Track Rage
$130.00
- Body material made of aluminum - Spindle Material: Chromoly - Weight: 436 grams pair - Big surface area - SPD Compatible - Color: Black - Pedals Thread 9/16-inch
Time ATAC XC 8
$130.00
The ATAC XC 8 is the pedal preferred by competitive cyclocross, mountain bike riders, and gravel road riders. It features the lightness of a carbon body and the durability of a chromed, hollow oversized steel axle. The exclusive ATAC system (TIME patent) offers very easy engagement and its open design automatically clears debris each time you step in. The ATAC XC 8 is also a great choice for trail riding or bike touring.
iSSi Trail III Pedal
$125.00 - $130.00
iSSi's Trail Pedals offer bold styling, reliable technology, and a wide platform for better contact while in and out of the pedal. The Trail platform disperses pressure on your foot and provides a little extra confidence when descending unclipped. Dual-sided entry makes these SPD-compatible pedals simple to get into, while easily adjustable entry/release tension is perfect for beginners and experts alike. With triple-sealed cartridge bearings and durable chromoly spindles, these pedals will spin smoothly for countless rides. Plus, four degrees of float helps your knees track naturally during every crank revolution.
Crank Brothers Double Shot 3 Pedals
$125.00
Crank Brothers' game-changing hybrid pedal is now available in a trail-ready version designed for more aggressive riding styles. Details - Hybrid pedal half flat / half clip-in - 8 adjustable traction pins and textured finish for grip - Wide 57mm q-factor for stability at speed - Diamond plate pads for traction - 2-sided entry / superior mud shedding - Premium bearings & double seal system Specs - Adjustable pins: 8 per side - Body material: A380 aluminum - Cleats: Premium brass cleats with shims included - Inner bearing type: Igus LL-glide bearing - Max rider weight: No restriction - Outer bearing type: Enduro cartridge bearing - Q-factor: 57mm - Release angle: 15° / 20° - Spindle material: Forged scm 435 chromoly steel - Spring material: 300 series stainless steel - Warranty: 5 years - Weight: 403g per pair - Wing material: Cast stainless steel
Shimano Deore XT M8100 Pedals
$120.00
- Large pedal platform - Lower platform height for pedaling stability - Robust retention claws provide smooth engagement and release - Customize the entry and release tension settings - Strong, durable chrome-moly spindle with 8 mm hex wrench mount - Sealed mechanism - SM-SH51 Cleat included - 1.0 mm cleat spacer included - Binding: Dual sided - Cartridge axle - Cleat retention adjuster - Average weight: 342g - Optional cleat: SM-SH56 - Pedal Type: Off-Road (SPD)
iSSi Flash III
$105.00 - $120.00
The Flash is iSSi's minimalist take on the traditional two-sided clipless pedal. It performs as well on the trail as it does on the commute. Three sealed cartridge bearings make the Flash III iSSi’s smoothest rolling, most durable, lightest clipless pedals with multiple spindle length options. - Spindle Type: Flip III: Triple Bearing - Smooth-rolling at an affordable pricepoint - SPD-compatible cleats and mounting hardware included
Race Face Aeffect Platform Pedals
$119.99
- Thin platform, concave aluminum body with bottom loading pins. - Shorter spindle design shaves weight. - Thin concave platform - Reduced spindle length saves weight - Hex-head threaded pin design offers more bite for added security - Hidden / Grease access port for extended life - Platform size: 101x100cm - Cartridge bearings and DU bushings - 20 SHCS hex traction pins per pedal
iSSi Stomp XL
$115.00
Stomp pedals feature a truly concave shape and proprietary pin profile, making these a leader in traction and feel. Fully extruded and CNC-machined to be the ultimate off-road pedal for everything from an all-mountain ride with friends to enduro racing. - Bushing & double bearing spindle configuration - Full-length chromoly spindles for durability - 44 iSSi concave pins (11 per side) and installation tool included - Platform size: 120 x 102 x 18mm - 64.5mm spindle length
Page 1 of 5 Next page